The Wireless 4-20MA Current Loop Sensor/Bridge uses a 10-bit ADC to measure an analog value between 4 and 20mA with a 10uA resolution. If the measured value rises above or falls below the configured thresholds, an alert is sent over the wireless network. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use.
The 4-20mA sensor can also be used as a bridge device to enable a wide variety of sensors with only a 4-20mA output. See the article Using Radio Bridge’s 4-20mA Current Loop Sensor to Connect Off-the-Shelf Devices to LoRaWAN for more information.
Features of the Wireless 4-20MA Current Loop Sensor/Bridge
- Based on LoRaWAN wireless technology
- Very long range up to several miles
- Excellent wireless penetration through structures such as walls and floors
- Enclosure tamper detection
- Automatic error reporting through supervisory messages
- Over the air configuration
- Built-in radio that talks directly with the LoRaWAN wireless network
- Two types of tamper detection: enclosure Tamper and wall mount tamper
- 200,000 + transmissions on a single battery and a 5-10 year battery life depending on usage
- User replaceable battery
- Fully integrated internal antenna
- Over the air sensor configuration in the field
- Automatic low battery reporting and supervisory (sensor health) reporting
Applications
• Monitoring industrial process controloutputs
• Monitor signaling to control valves
• Enable existing 4-20mA sensors with LoRaWAN
• General monitoring of a 4-20mA industrial output